Warp Beaming Machine

Machine type:APM-JZ201

Working width:1300mm,1600mm

Wire material:Stainless steel,aluminium,iron,copper,brass,nickel,silver,platinum,etc.

Wire diameter range:0.02mm-0.6mm

Speed:0-36rolls/min

Control method:button+remote control+jog foot switch

Tension control:Automatic

Transmission:1.5KW reducer+high power VFC+sliding replaced combined gear.

Welcome to contact us to get more details.

APM-JZ201

1. This machine is primarily used for the warp preparation process of fine metal wire made from raw materials such as stainless steel, phosphor bronze, brass, silver, and platinum.

2. This machine can be operated smoothly and reliably during the warp preparation process, meeting the technical requirements for the corresponding wire material.

3. This machine is fully computerized numerical control.The control panel is touch screen with display.It also has Button panel,remote control and foot switch jog action.

4. The wire tension can be displayed accurately.The error is below 0.1kg.Just pre-set the parameters and the machine will control and maintain the consistent tension automatically according to the thickness if rolling.

5. When the device is operating, there is no overall vibration at different speeds, and the noise is controlled below 50 decibels.

6. Overall can be adjusted for 1.3 meters and 1.6 meters length warp beam. Customized machines can also be done for beams of 2.0m,2.2m,2.5m,etc.