Adjustment of Edge-weaving Mechanism-Installation of The Side Meridians on the Meridian Frame

(1) Check each complex shaft in its frame seat whether there 

is stringing phenomenon, whether the top wire is tightened, 

must be installed firmly, the complex shaft without rotating 

stringing phenomenon can be on the complex.

(2) Choose the appropriate side of the meridian complex, the 

side of the meridian complex should not be too large, not to 

mention the use of loose complex, multi-head complex.

(3) Both sides of the complex should be equipped with shims, 

and the end of the compression spring should use a double nut 

to secure the position; do not use a nut to secure the position 

on the complex shaft.