Selection of the amount of weaving edge take-up when weaving different wire meshes

(1) When weaving square hole mesh and plain dense 

pattern mesh, the amount of weaving side of the roll 

is generally selected each time the roll (1~1.2) mesh 

length, not less than 1 mesh length.

(2) Weaving twill wire mesh, we must use the weaving 

edge take-up mechanism to take up the weaving edge, 

the volume of take-up choose each roll (1.5~2) mesh 

long, otherwise, the side of the warp can not be woven 

smoothly, this is due to the weaving of twill wire mesh 

weft density is a double-layer, and weaving the edge of 

the weaving is woven according to the plain pattern, can 

only be arranged by a single layer of weft, according to 

the double layers of weft arrangement can not be arrang

-ed by a single layer of weft arrangement must be increas

-ed take-up after the weaving of the edge of the weaving

mouth to be able to flush with the twill mesh weaving. 

The position of the weaving edge can be flush with the 

weaving mouth of the twill wire mesh.