Understanding the key components of the self-stopping mechanism-Stopping Masts

1. There are two types of warp stop motions: 

One is a single-electrode solid warp stop motion 

and the other is a double-electrode motion.

2. Structural dimensions of the warp stop motions: 

The single electrode solid warp stop motion is actually 

a very straight, semi-hard flat steel, with specifications 

of 1650 mm×(16~18) mm×(3~3.4) mm (length×width

×thickness); double-electrode warp stop motions with 

specifications of 1650mm×18.5mm×3.4mm (length×

width×thickness), and its sectional structure is shown 

in Figure 3-16:

(1) - Stainless steel plate with a core thickness of 1.2 mm;

(2) - Insulating mylar film 0.3 mm thick;

(3) - Thick 0.8mm stainless steel plate.

3. The role of the warp stop rod: 

To support the warp stop piece, so that the warp stop 

piece is stabilized in a certain orderly position; conduc

-tion of the warp stop circuit, the role of the switch of 

the warp stop circuit.